Setting The Throw-Over Stacker - DURKOPP ADLER 745-35-10 S Service Instructions Manual

Stacker

14.2.2 Setting the throw-over stacker

Fig. 143: Setting the throw-over stacker (1)
(1) - Stacking bracket
(2) - Swivel bracket
Information
The switch actuation point is advanced or delayed by turning the switch
cams towards (-) = earlier or (+) = later.
Fig. 144: Setting the throw-over stacker (2)
(5) - Switch
(6) - Screw
To set the throw-over stacker:
1. Start signal: Swivel bracket (2) closes.
2. The switch (5) is pressed approx. 5 mm before the stacking bracket (1)
3. Loosen the screw (6) and adjust the switch cam (7) by turning.
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
①
⑤
⑥
⑦
is reached.
a
(3) - Throw-over bracket
(4) - Clamping bracket
(7) - Switch cam
④
③
②
163