Configuring with Web Based Management
6.6 "Interfaces" menu
● Link
Shows the connection status to the network. With the connection status, the following is
possible:
– up
– down
● Current Transmission Parameters
Shows the transfer parameters of the port.
● Negotiation
Shows whether the automatic configuration is enabled or disabled.
● MAC Address
Shows the MAC address of the port.
6.6.1.2
Configuration
Configuring ports
With this page, you configure the Ethernet ports of the device.
220
The port has a valid link to the network, a link integrity signal is being received.
The link is down, for example because the connected device is turned off.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03