Ntp Client - Siemens SCALANCE W1780 Configuration Manual

3. Select one of the following options from the "SNTP Mode" drop-down list:
– Poll
– Listen
4. In the "Poll Interval[s]" input box, enter the time in seconds after which a new time query is
sent to the time server.
5. In the "SNTP Server Address" input box, enter the IP address or the FQDN of the SNTP
server whose frames will be used to synchronize the time of day.
6. Click the "Create" button.
A new row is inserted in the table for the SNTP server.
7. In the "SNTP Server Port" column, enter the port via which the SNTP server is available. The
port can only be modified if the IPv4 address or the FQDN name of the SNTP server is
entered.
8. Click the "Set Values" button to transfer your changes to the device.
6.5.12.5

NTP Client

Automatic time-of-day setting with NTP
If you require time-of-day synchronization using NTP, you can make the relevant settings here.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
For this mode, you need to configure the following:
- Time zone difference (step 2)
- Query interval (step 4)
- Time server (step 5)
- Port (step 7)
- Complete the configuration with step 8.
For this mode, you need to configure the following:
- Time difference to the time sent by the server (step 2)
- Complete the configuration with step 8.
Configuring with Web Based Management
6.5 "System" menu
199