Snmp - Siemens SCALANCE W1780 Configuration Manual

Configuring with Web Based Management
6.4 "Information" menu
● Binding State
Shows the status of the assignment.
– Assigned
– Not used
– Probing
– Unknown
● Expire Time
Shows until when the assigned IPv4 address is still valid. Up to this time, the DHCP client
must either request a new IPv4 address or extend the lease time of the assigned IPv4
address.
See also
Start page (Page 84)
6.4.14

SNMP

This page displays the created SNMPv3 groups. You configure the SNMPv3 groups in "System
> SNMP".
Description
The table has the following columns:
● Group Name
Shows the group name.
● User Name
Shows the user that is assigned to the group.
112
The assignment is used.
The assignment is not used.
The assignment is being checked.
The status of the assignment is unknown.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03