Configuring with Web Based Management
6.4 "Information" menu
● Channel Width [MHz]
Shows the set channel bandwidth.
– 20 MHz
– 40 MHz (only with IEEE 802.11n/ac)
– 80 MHz or 160 MHz (only with IEEE 802.11ac)
● Connected BSSID
Shows the MAC address of the access point to which the client is connected.
● Connected SSID
Shows the SSID of the access point to which the client is connected.
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
● Context
Shows which security context is used.
● iFeatures
Shows which iFeatures are used.
– -
– iPRP
● Max. Data Rate [Mbps]
Shows the maximum data transmission speed in megabits per second.
● State
Shows the status of the WLAN interface.
– enabled
– disabled
6.4.16.3
Client List
Note
This WBM page is only available in access point mode.
122
iFeatures are not used.
The WLAN interface is enabled.
The WLAN interface is disabled.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03