Use And Storage Of Supplies; Paper Storage - Ricoh FT2012 Operating Instructions Manual

USE AND STORAGE OF SUPPLIES

USE AND STORAGE OF SUPPLIES
Copy Paper
Copy paper of the types or in the conditions listed below are not recommended
for this copier.
Folded, curled, creased, or damaged paper
Torn paper
Damp paper
Perforated paper
Paper w ith conductive or low electrical resistance such as carbon or sliver
coated paper.
Wavy paper
Thermal paper, art paper
Thin paper that has low stiffness
Adhesive labels should be fed from the bypass feed entrance one sheet at a time.
Translucent paper should be fed from the bypass feed entrance.
Translucent paper should be fed so that the paper grain is oriented with the paper
path.
Do not touch copy paper if your fingers are wet or oily; finger prints may appear
on the copy.
USE AND STORAGE OF SUPPLIES
63