Bis Lit Or Blinking: Add Toner - Ricoh FT2012 Operating Instructions Manual

f IS LIT OR BLINKING: ADD TONER
f
IS LIT OR BLINKING: ADD TONER
When the Add Toner B indicator blinks, it is time to supply toner
(copying is still possible). When the Add Toner B indicator is continu-
ously on, copies cannot be made until the toner bottle is replaced.

WARNING: Do not incinerate used toner or toner containers. Toner
Note: When you change the toner bottle, be careful not to touch the
blue material (OPC).
Not e: Before set t ing t he new t oner bot t le, shake it well at least 5 or 6
t imes.
Not e: Do not remove t he t oner bot t le before t he Add Toner B indicat or
comes on — t oner could spill out .
1
Open the new toner bottle box
and take out the bottle.
..........................................................
2
Shake the new bottle well at
least 5 to 6 times.
dust might ignite when exposed to an open flame.
Dispose of the used toner containers according to local
regulations.
B
IS LIT OR BLINKING: ADD TONER
31