If Your Copier Does Not Operate Properly - Ricoh FT2012 Operating Instructions Manual

IF YOUR COPIER DOES NOT OPERATE PROPERLY

IF YOUR COPIER DOES NOT OPERATE
IF YOUR COPIER DOES NOT OPERATE
Check the following:
Copier's condition
Nothing happens when
the switch is turned on.
is lit.
is blinking or lit.
is lit.
The copier has turned it-
self off (10 minutes after a
copy was made or a key
was pressed.
Copies have white streaks.
Copy image density is un-
even.
U1 is displayed on the
copy counter.
U2 is displayed on the
copy counter.
26
PROPERLY
PROPERLY
Check the power cord. Is it properly
plugged into the outlet?
Plug it in firm ly.
Is the top unit completely closed?
Close the top unit com pletely w ith
both hands.
Load paper.
Set a new toner bottle.
Clear misfed paper.
The Auto-off function is set.
Turn on the m ain sw itch.
Clean the corona w ires.
page 57.
Clean the corona w ires.
page 57.
Set a im aging unit correctly.
page 35.
Com pletely rem ove the tape from
inside the im aging unit.
page 36.
Action
See page 30.
See page 31.
See page 40.
See
See
See
See