Sensitivity A and B
@ DC to 5 MHz
@ 25 MHz
@ 40 MHz
Voltage level error
Slope
Video on A
Modes
Standards
Polarity
Sensitivity
2.2.4 Advanced Scope Functions
Display Modes
Normal
Smooth
Envelope
Auto Set
Continuous fully automatic adjustment of amplitude, time base, trigger levels, trigger
gap, and hold-off. Manual override by user adjustment of amplitude, time base, or
trigger level.
2.3 Dual Input Meter
The accuracy of all measurements is within ± (% of reading + number of counts) from
18 °C to 28 °C.
Add 0.1x (specific accuracy) for each °C below 18 °C or above 28 °C. For voltage
measurements with 10:1 probe, add probe uncertainty +1%.
More than one waveform period must be visible on the screen.
2.3.1 Input A and Input B
DC Voltage (VDC)
Ranges
Accuracy
Turnover
Normal Mode Rejection (SMR)
Common Mode Rejection (CMRR)
Full Scale Reading
Move influence
0.5 divisions or 5 mV
1.5 divisions
4 divisions
±0.5 div. max.
Positive, Negative
Interlaced video signals only
Lines, Line Select
PAL , NTSC, PAL+, SECAM
Positive, Negative
0.6 divisions sync.
Captures up to 40 ns glitches and displays analog-like persistence
waveform.
Suppresses noise from a waveform.
Records and displays the minimum and maximum of waveforms
over time.
500 mV, 5V, 50V, 500V, 1250V
±(0.5% +5 counts)
±12 counts
>60 dB @ 50 or 60 Hz ±1%
>100 dB @ DC
>60 dB @ 50, 60, or 400 Hz
5000 counts
±6 counts max.
2
Characteristics
2.3 Dual Input Meter
2-5