Automatic Oven Cooking - DeLonghi DESM463 Series Users Operating Instructions, Installation Instructions

Multi-function oven
Table of Contents

Advertisement

AUTOMATIC OVEN COOKING

To cook food automatically in the oven, it is
necessary to:
1.
Set the length of the cooking period.
2.
Set the end of the cooking time.
3.
Set the temperature and the oven co-
oking program.
These operations are done in the following
way:
1.
Set the length of the cooking period
by pushing the
button
to increase, or
crease if you have passed the desired
time (fig. 3.5). The AUTO and the
symbol will illuminate.
2.
Set the end of the cooking time by pres-
sing the
already added to the clock time will ap-
pear), and the
you pass the desired time you may get
back by pushing the

After this setting, the
will disappear. If after this setting, the
AUTO flashes on the display and a
buzzer sounds, it means there was
an error in the programming, that is
that the cooking cycle has been su-
perimposed on the clock. In this case,
modify the end of cooking time or the
cooking period itself by following again
the above mentioned instructions.
Fig. 3.5
14
button and the
to de-
button (the cooking time
button (fig. 3.6); if
button.
symbol
3.
Set the temperature and the cooking
program by using the switch and ther-
mostat knobs of the oven (see specific
chapters).
Now
the
oven
everything will work automatically, that is
the oven will turn on at the right moment
to end the cooking at the established hour.
During cooking, the
illuminated.
By pushing the
time that remains until the end of cooking.
The cooking program may be cancelled
at any time by pushing
At the end of the cooking time the oven will
turn off automatically, the
turn off, AUTO will flash and a buzzer will
sound, which can be turned off by pushing
any of the buttons except the
buttons.
Turn the switch and thermostat knobs to
zero and put the programmer onto "ma-
nual" by pressing the
Attention: After a power cut the clock re-
sets to zero and cancels the set programs.
After a power cut, three zeros will flash on
the display.
Fig. 3.6
is
programmed
symbol remains
button you can see the
.
symbol will
/
button.
and

Advertisement

Table of Contents
loading

Table of Contents