Related Manuals for DeLonghi DESM463 Series
Summary of Contents for DeLonghi DESM463 Series
- Page 1 Users O pe r a ti n g In structi ons Inst al l a t io n I ns tructi ons Bef o re o pe ra tin g thi s o ven , p l e as e re a d t h ese i nstru cti on car efu lly DESM463 ..
- Page 2 Important: This appliance is designed and manufactured solely for the cooking of domestic (hou- sehold) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. This appliance guarantee will be void if the appliance is used within a non domestic environment i.e.
- Page 3 Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations within this booklet are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance.
-
Page 4: First Use Of The Oven
FIRST USE OF THE OVEN It is advised to follow these instructions: • Furnish the interior of the oven as described at chapter “Cleaning and maintenance”. • Switch on the empty oven on max to eliminate grease from the heating elements. •... - Page 5 • Do not line the oven walls with aluminium foil. Do not place baking trays or the drip tray on the base of the oven chamber. • The manufacturer declines all liability for injury to persons or damage to property cau- sed by incorrect or improper use of the appliance.
-
Page 6: Control Panel
CONTROL PANEL Fig. 1.1 CONTROLS DESCRIPTION Oven temperature control knob Function selector control knob Oven temperature indicator light Digital electronic programmer Power on indicator light Note: Your appliance has been fitted with a cooling fan to achieve optimum efficiency of the con- trols and to ensure lower surface temperatures are maintained. -
Page 7: How To Use The Oven
HOW TO USE THE OVEN OPERATING PRINCIPLES Attention: The oven door becomes Heating and cooking in the MULTIFUN- very hot during operation. CTION oven are obtained in the following Keep children away. ways: a. by normal convection WARNING: The heat is produced by the upper and lower heating elements. -
Page 8: Thermostat Knob
Fig. 2.1 Fig. 2.2 THERMOSTAT KNOB To turn on the heating elements of the oven, set function selector knob to the required po- sition and the thermostat knob to the desired temperature. To set the temperature, turn the thermostat control knob indicator mark to the required temperature. -
Page 9: Defrosting Frozen Foods
GRILLING The infra-red heating element is switched on. The heat is diffused by radiation. Use with the oven door closed and the thermostat knob must be regulated between 50°C and 225°C maximum. For correct use see chapter “USE OF THE GRILL”. Always grill with the oven door closed. -
Page 10: Cooking Advice
MAINTAINING TEMPERATURE AFTER COOKING OR SLOWLY HEATING FOODS The upper element and the circular element connected in series, are switched on; also the fan is on. The heat is diffused by forced convection with the most heat being produced by the upper ele- ment. -
Page 11: Use Of The Grill
SIMULTANEOUS COOKING OF DIFFERENT FOODS The MULTI-FUNCTION oven set on position gives simultaneous heteroge- neous cooking of different foods. Different foods such as fish, cake and meat can be coo- ked together without mixing the smells and flavours. This is possible since the fats and vapors are oxidized while passing through the electrical element and therefore are not deposited onto the foods. -
Page 12: Digital Electronic Programmer
DIGITAL ELECTRONIC PROGRAMMER The electronic programmer is a device which groups together the following functions: • 24 hours clock with illuminated display • Timer (up to 23 hours and 59 minutes) • Program for automatic oven cooking • Program for semi-automatic oven cooking Description illuminated Description of the buttons:... -
Page 13: Electronic Clock
ELECTRONIC CLOCK ELECTRONIC TIMER (fig. 3.2) The programmer is equipped with an elec- The timer program consists only of a buz- tronic clock with illuminated numbers which zer which may be set for a maximum period indicates hours and minutes. of 23 hours and 59 minutes. -
Page 14: Automatic Oven Cooking
AUTOMATIC OVEN COOKING Set the temperature and the cooking program by using the switch and ther- To cook food automatically in the oven, it is mostat knobs of the oven (see specific necessary to: chapters). Set the length of the cooking period. oven programmed Set the end of the cooking time. -
Page 15: Semi-Automatic Cooking
SEMI-AUTOMATIC COOKING At the end of the cooking time the oven will turn off automatically, the symbol will This is used to automatically switch off the turn off, AUTO will flash and a buzzer will oven after the desired cooking time has sound, which can be turned off by pushing elapsed. -
Page 16: Cleaning And Maintenance
CLEANING AND MAINTENANCE GENERAL ADVICE ENAMELLED PARTS • Important: Before any operation of All the enamelled parts must be cleaned cleaning and maintenance discon- with a sponge and soapy water or other nect the appliance from the electri- non-abrasive products. cal supply. - Page 17 WIRE RACKS • Assemble the wire racks to the oven walls using the 2 screws (Fig.4.1). • Slide into the guides, the shelf and the tray (fig. 4.2). The shelf must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.
-
Page 18: Removing The Oven Door
REMOVING THE OVEN DOOR The oven door can easily be removed as follows: • Open the door to the full extent (fig. 4.4a). • Open the lever “A” completely on the left and right hinges (fig. 4.4b). • Hold the door as shown in fig. 4.4. •... - Page 19 Advice for the installer IMPORTANT • The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment. Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have.
-
Page 20: Installation
INSTALLATION IMPORTANT • The oven can be fitted in standard units, width and depth 60 cm. • Installation requires a compartment as illustrated in figures 5.1 and 5.2. On the lower side, the oven must lay on supports standing the oven weight. •... - Page 21 To ensure internal ventilation, aeration channels must be provided as illustrated in the figures 5.3 and 5.4. Fig. 5.4 50 mm Fig. 5.3 30 mm...
-
Page 22: Fixing The Oven
FIxING THE OVEN Introduce the oven into the furniture opening and fix it with screws (not supplied) as figure 5.5. It is essential that the oven rests on a surface which will support its weight, as the screw fixing is only complementary. Note It is essential that when installing your oven adequate air circulation is allowed for within the installation. - Page 23 IMPORTANT: To avoid damage to the lower trim please note the following instructions. The lower trim is designed to allow for good air circulation and the correct opening of the oven door. To ensure the trim is not damaged due to the appliance being placed on the floor, the ap- pliance should be suitably supported as in below illustrations.
-
Page 24: Electrical Section
ELECTRICAL SECTION IMPORTANT: Installation must be carried out according to the manufacturer’s in- structions. Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility. Before carrying out any work on the electrical section of the appliance, it must be disconnected from the mains. - Page 25 Important The wires in the mains lead on this appliance are coloured in accordance with the following code: Green and Yellow - Earth Blue – Neutral Brown – Live As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows.
-
Page 26: After Sales Service
GUARANTEE Your new “De’Longhi” product comes with 12-month guarantee covering all parts and labour. If your appliance proves to be defective as a result of faulty materials or workmanship during the guarantee period, these parts will be repaired or replaced free of charge. AFTER SALES SERVICE Should you require service, spares or product information and advice: •... - Page 28 The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription errors in the present booklet. The manufacturer reserves the right to make all modifications to its products deemed necessary for manufacture or commercial reasons at any moment and without prior notice, without jeopardising the essential functional and safety characteristics of the appliances.