G Laser (Shg) Optimal Temperature Setup (0522) - FujiFilm SP-3000 Service Manual

5.6 Printer Adjustment/Maintenance (05)
4. Click the [Set] button.
• The feed length is changed.
5. Click the [Close] button.
• Operation returns to the menu screen.

5.6.2 G Laser (SHG) Optimal Temperature Setup (0522)

The G laser optimal temperature setting message
appears every three months. Set up the optimal
temperatures on this screen.
[Selection]
[Setup and Maintenance] → [05 Printer Adjustment/
Maintenance] → [0522 G Laser (SHG) Optimal
Temperature Setup]
1. Click the [Enter] button.
• The result is displayed.
2. Click the [Close] button.
• Operation returns to the menu screen.
Distributed by minilablaser.com
5-96