Auto Washing And P1R Stirring System - FujiFilm SP-3000 Service Manual

16.3 Auto Washing and P1R Stirring System

16.3.1 Auto Washing Pump (PU720) Replacement
Removal
1. Remove:
• PSR pump bracket
(See Subsection 16.2.3)
• Connector cover
(See Subsection 16.2.4)
2. Disconnect the connector and open the three
clamps.
3. Pinch the three inlet and outlet hoses with the
three pinchcocks.
4. Loosen the two hose clamps and disconnect the
hoses from the pump.
5. Remove the two screws and then the pump.
Installation
Installation is essentially in the reverse order of removal.
NOTE: • Connect the hoses securely
(See Subsection 15.2.9).
• After installation, perform the following adjustment.
Menu 0621 "Auto Cleaning Output
Measurement/Setting"
Distributed by minilablaser.com
.
.
(See Subsection 5.7.2).
16-23
Clamps (3)
Pump
Hoses (3)
Pinchcocks (3)
Clamps (2)
Connector
LII714
Screws (2)
LII715
16