Mmp-16 Back Panel Connections - Tascam MMP-16 Owner's Manual

MMP-16
MODEL NO.
MODULAR MULTITRACK PLAYER
TEAC CORPORATION
115 / 230 ~, 2.0 / 1.0 A, 50 - 60Hz
SERIAL NO. MADE IN USA

MMP-16 Back Panel Connections

The MMP-16 back panel has connectors for the system analog and digital audio output, as well as various
types of synchronization and control signals. The following MMP back panel connections are described
in this chapter, and the pin outs for many of these connectors are given in Appendix D: Cable
Information.
Analog audio out (x2)
Digital audio I/O
Biphase in (BOB)
Biphase out (BOB)
Mono mix audio out (PRX)
SCSI
Remote control (UI/B)
MMR bus (Sync)
Word clock in
Word clock out
Video in
Video out
Midi in
Midi out
Midi thru
VITC in
Time code in
Time code out
Lynx (2 connections)
Editor (Sony 9-pin)
Transport (Sony 9-pin)
Parallel Tracks
Parallel Transport
MMP-16 Tascam MMP-16 Owner's Manual • Chapter 2 • Installation
PARALLEL TRACKS
R
LISTED
XXDK
UL1950 MIDI
E1XXXX
WORD CLOCK VIDEO
IN OUT IN OUT IN OUT
CHANNEL CHANNEL
9 - 16 1 - 8
Figure 2-3. MMP-16 Back Panel
Not intended for public telecommunication network connection
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING RESTRICTIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
TIME CODE
VITC
LYNX
THRU IN IN OUT
DIGITAL
9 - 16
BOB PRX SCSI SPARE AIO 16
PARALLEL TRANSPORT
EDITOR TRANSPORT
DIGITAL
OUT OUT
1 - 8
DIO 16 UIB SYNC
21