Word Clock In Connector; Word Clock Out Connector; Video In/Out Connector; Vitc In Connector - Tascam MMP-16 Owner's Manual

WORD CLOCK IN Connector

NOTES:

WORD CLOCK OUT Connector

NOTES:

VIDEO IN/OUT Connector

NOTES:

VITC IN Connector

NOTES:

SERIAL CONNECTORS

NOTES:

SCSI Connector

NOTES:

PRX Connector

NOTES:
Tascam MMP-16 Owner's Manual • Appendix D • Cable Information
1. BNC, 75 Ohm Terminated. TTL logic levels.
1. BNC, 75 Ohm Drive Capability. TTL logic levels.
1. BNC, Video is connected in parallel between connectors.
2. 1K Ohm input impedance. Supports Composite, Color Bars, Black Burst.
Should be 75 ohm terminated if at end of cable.
1. BNC, 75 Ohm Terminated.
1. These connectors are for factory diagnostics only.
2. 9-pin D-subminiature female connector (DB-9), connected to COM1 on the
motherboard.
3. 25-pin D-subminiature female Connector (DB-25), connected to COM2 on the
motherboard.
1. SCSI-2 Compliant.
1. 3.5 mm Stereo Phonejack.
2. Same audio signal as on Headphone Monitor, but audio on tip
(left channel) only.
105