SYNC (MMR-Bus) Connector pinout
PIN # Signal Description
1
2
3
4
5
6
7
8
NOTES:
1. 15-pin D-subminiature female connector (DB-15). The two connectors are
2. Tascam supplies a 3 foot interface cable, 70447. The differential signals should
TIMECODE IN Connector
PIN # Signal Description
TIP
Ring
Sleeve Ground
NOTES:
1. 1/4" TRS Phonejack
2. 10K Ohm input impedance. Differential input.
TIMECODE OUT Connector
PIN # Signal Description
TIP
Ring
Sleeve Ground
NOTES:
1. 1/4" TRS Phonejack
2. Differential op-amp output circuit.
104
Tascam MMP-16 Owner's Manual • Appendix D • Cable Information
CAN_BUS+
CCLK_BUS0+
CCLK_BUS1+
CCLK_BUS2+
CCLK_BUS3+
+12 TERM PWR
CAN LEFT TERM
N/C
paralleled in the MMP-16 and either can be used as an input or output.
be routed on twisted pairs of wires.
Time Code Reader +
Time Code Reader -
Time Code Reader +
Time Code Reader -
PIN # Signal Description
9
CAN_BUS-
10
CCLK_BUS0-
11
CCLK_BUS1-
12
CCLK_BUS2-
13
CCLK_BUS3-
14
Frame ground
15
CAN RIGHT TERM