Analog Output Connectors Pinouts; Biph (Biphase) Connectors Pinout - Tascam MMP-16 Owner's Manual

ANALOG OUTPUT Connectors pinouts

There are two DB-25 style analog output connectors, one for tracks 1-8, the other for tracks 9-16 as
labelled on the back of the MMP-16 unit. They each follow the pattern indicated here:
NOTES:
1. 25-pin D-subminiature female connector (DB-25). The pinouts follow the
2. Input impedance is 10k ohm.
3. Output impedance is 75 ohm.
4. Max load 12.28 VRMS

BIPH (Biphase) Connectors pinout

NOTES:
1. RJ12 compatible Modular Plug, 6 Position, 6 Conductor.: Flat Wire - Stranded.
2. The four Biphase Inputs are selected one-at-a-time by the Sync Group setting.
3. Not intended for public telecommunication network.
102 Tascam MMP-16 Owner's Manual • Appendix D • Cable Information
PIN # Signal Description
1 Channel 8 + signal
2 Channel 8 ground
3 Channel 7 - signal
4 Channel 6 + signal
5 Channel 6 ground
6 Channel 5 - signal
7 Channel 4 + signal
8 Channel 4 ground
9 Channel 3 - signal
10 Channel 2 + signal
11 Channel 2 ground
12 Channel 1 - signal
13 No connection
Tascam DA-88 configuration. Each input is differential with the (+) inputs
being the non-inverting input and the (-) being the inverting input.
PIN # Signal Description
Ground
1
Phase-A
2
Phase-B
3
Phase-B
4
Phase-A
5
Ground
6
Round Wire - Stranded. DataComm Warehouse (http://kerry.warehouse.com/)
can supply these parts, however, many other sources available.
PIN # Signal Description
14 Channel 8 - signal
15 Channel 7 + signal
16 Channel 7 ground
17 Channel 6 - signal
18 Channel 5 + signal
19 Channel 5 ground
20 Channel 4 - signal
21 Channel 3 + signal
22 Channel 3 ground
23 Channel 2 -signal
24 Channel 1 + signal
25 Channel 1 ground