General Guidelines; Mounting Rack Ears - Tascam MMP-16 Owner's Manual

General Guidelines

Mounting Rack Ears

The MMP-16 is a self-contained sixteen channel digital playback device designed to be mounted in a
standard 19" (48.26 cm) IEC equipment rack in either the mix studio or a dedicated machine room in a
professional audio recording facility. As such, each MMP-16 is housed in a steel chassis 19-inches (48.26
cm) wide by 17 ¼ inches (43.81 cm) deep by 7-inches (17.78 cm) tall. Each MMR-8 requires 5U (7-
inches or 17.78 cm) of rack space.
Integral rack ears are provided with the chassis. If the unit is not rack-mounted, the rack ears do not need
to be installed onto the MMP-16 chassis. For rack mounting, install one rack ear to the front of each side
of the MMP-16 (three Phillips screws per side are supplied for fastening the rack ears to the chassis).
Figure 2-1. Rack Ear Installation
18 Tascam MMP-16 User's Guide • Chapter 2 • Installation MMP-16