TRANSPORT (Sony 9-pin) Connector pinout
PIN #
MSTR Signal
1
Frame ground
2
Receive -
3
Transmit +
4
Frame ground
5
Spare Fr Ck
NOTES:
Tascam MMP-16 Owner's Manual • Appendix D • Cable Information
SLAVE Signal
Frame ground
Transmit -
Receive +
Frame ground
Spare Fr Ck
1. 9-pin D-subminiature female connector (DB-9).
2. Signals are RS422 Compatible Frame Clock spare should not be used.
3. The two connectors allow parallel connection of the Lynx Bus. Each pin is
paralleled internally between the two connectors. The signal description
indicates master / slave signals.
4. Signal Descriptions are MMR Output / Transport (Input). Signals are of
Protocol-2 (P-2) standard, which is also known as Sony 9-pin
Pin #
MSTR Signal
6
Frame ground
7
Receive +
8
Transmit -
9
Frame ground
SLAVE Signal
Frame ground
Transmit +
Receive -
Frame ground
101