Tascam MMP-16 Owner's Manual page 115

Abbreviations
and Terms
Monitor
Motion Controls
MTC
Multitrack
NDF
NTSC
Offset
Operating State
PAL
Phase Lock
RAM
Rate
Reference
110 Tascam MMP-16 Owner's Manual • Appendix E • Glossary
Definitions
The process of selecting one or more tracks to listen to in the headphones or
rear panel studio monitor output.
The "transport" keys on the MMP-16.
MIDI Time Code. Time code that is transmitted as part of a MIDI signal.
Because there is not enough room for the complete time code to be sent at once,
MTC counts in two frame increments.
A tape or solid state device that can record and/or playback more than one track
of audio at a time.
Non-Drop Frame. A type of time code that uses full frames for timing. It is
used in audio-only applications and with black and white video.
National TV Standards Committee. The television and video format used in the
USA and Japan. The basic frame rate is 30 fps for monochrome and 29.97 fps
for color transmissions and recording.
The amount of difference between the program time code and an event. Tracks
and entire machines can be offset. Offsets are sometimes added to correct for
incorrect time code numbers on a tape or to compensate for timing delays
between machines.
There are eight operating states of the MMP-16, Normal, Setup, Load Track,
View Track, Slip Track, Backup,Verify, and Error. These are distinguished by
the nature of the information displayed in the LCD window and by the keys
that are available while in each state.
Phase Alternating Line. The main European broadcasting standard that uses a
25 fps rate.
The process where a machine is locked to reference signal (or to another
machine's reference signal) so that its reference signal can be matched in phase
by controlling the speed of the machine compared to the other machine or to a
speed reference signal.
Random Access Memory. To convert audio from analog into digital, or vice
versa, a RAM buffer is required to allow the continuous analog audio to be
converted into "chunks" of digital data and the chunks of data from the hard
drive to be converted back into continuous analog audio.
How many ticks per second of some clock or other counter. There are various
rates used in the MMP-16 include fps (frames per second), ppf (pulse per
frame, biphase), word clock (samples per second)
The master clock. The MMP-16 uses two reference signals: a sample reference