Midi In/Thru/Out Connector Pinout; Lynx (Remote Controller) Connector Pinout; Editor Connector Pinout - Tascam MMP-16 Owner's Manual

MIDI IN/THRU/OUT Connector pinout

NOTES:

LYNX (Remote Controller) Connector pinout

PIN # MSTR Signal
1 Frame ground
2 Receive -
3 Transmit +
4 Frame ground
5 Frame clock
NOTES:
1. 9-pin D-subminiature female connector (DB-9).
2. Signals are RS422 Compatible Frame clock is open collector driver.
3. The two connectors allow parallel connection of the Lynx Bus. Each pin is

EDITOR Connector pinout

PIN # MSTR Signal
1 Frame ground
2 Receive -
3 Transmit +
4 Frame ground
5 Spare Fr Ck
NOTES:
1. 9-pin D-subminiature female connector (DB-9).
2. Signals are RS422 Compatible. Frame Clock spare should not be used.
3. The two connectors allow parallel connection of the Lynx Bus. Each pin is
100 Tascam MMP-16 Owner's Manual • Appendix D • Cable Information
PIN # Signal Description (IN, OUT, & THRU)
1 n/c
2 n/c
3 n/c
4 Signal +
5 Signal -
1. DIN-5 connector - shield tied to case.
2. Signals are MIDI specification compliant.
SLAVE Signal Pin #
Frame ground 6
Transmit - 7
Receive + 8
Frame ground 9
Frame clock
paralleled internally between the two connectors. The signal description
indicates master / slave signals.
SLAVE Signal Pin #
Frame ground 6
Transmit - 7
Receive + 8
Frame ground 9
Spare Fr Ck
paralleled internally between the two connectors. The signal description
indicates master / slave signals.
MSTR Signal SLAVE Signal
Frame ground Frame ground
Receive + Transmit +
Transmit - Receive -
Frame ground Frame ground
MSTR Signal SLAVE Signal
Frame ground Frame ground
Receive + Transmit +
Transmit - Receive -
Frame ground Frame ground