Appliance Operation - Baxi Ecogen 24/1.0 Installation & Servicing Instructions Manual

Fig. 2
Fig. 2a
page 8
3.0 Appliance Operation
3.1 Operating Mode (Fig. 3)
1. With a demand for heating or hot water, the pump circulates water through the primary circuit. If the flow is 4.0 L/min or above the ignition sequence will start.
2. When the flow temperature reaches the set point temperature, a 5 minute delay occurs before the burner relights automatically (anti­cycling). The pump continues to run
during this period.
3. When the demand is satisfied the burner is extinguished and the pump continues to run for a period of 5 minute (Pump Overrun).