Baxi Ecogen 24/1.0 Installation & Servicing Instructions Manual page 44

Gas fired wall mounted condensing boiler and power generator
Table of Contents

Advertisement

page 43
10.9 S­Plan with DHW Cylinder Thermostat
1. The appliance MUST have a permanent Live/Neutral/Earth connection. The pump must be connected to the appliance as shown.
2. Set parameter 5700 to '2' for one heating circuit ­ see section 11.3.k.
3. The DHW set point on the THINK Controller must be the same as the thermostat set point on the cylinder. If this is not done the DHW temperature may not be achieved or
the recovery time will be increased.

Advertisement

Table of Contents
loading

Table of Contents