Baxi Main System Eco Elite Range User's Manual And Important Warranty Information

System eco elite range

Advertisement

System Eco Elite
User's Guide and
Range
Important Warranty Information
Please keep these instructions in a safe place.
If you move house, please hand them over to the next occupier.
© Baxi Heating UK Ltd 2013

Advertisement

Table of Contents
loading

Summary of Contents for Baxi Main System Eco Elite Range

  • Page 1 System Eco Elite User’s Guide and Range Important Warranty Information Please keep these instructions in a safe place. If you move house, please hand them over to the next occupier. © Baxi Heating UK Ltd 2013...
  • Page 2: Table Of Contents

    Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For more information visit www.centralheating.co.uk © Baxi Heating UK Ltd 2013 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, or stored in any...
  • Page 3: Quick Reference Guide

    Central Heating System Pressure - The normal operating water pressure is between 1 and 2.0 bar. If the pressure exceeds 3 bar the safety pressure valve will operate and a fault is indicated. Contact your Installer. © Baxi Heating UK Ltd 2013...
  • Page 4: Troubleshooting

    If the reading falls below 1 bar repressurise the system as Turn the ON/OFF/Reset described in section 3.1. Selector Switch to Reset. If boiler does not Reset Reset Error Code E119 showing low pressure. © Baxi Heating UK Ltd 2013...
  • Page 5 INSTALLER OR SERVICE ENGINEER. If you don’t know what you need to do to get the boiler to light, or need help with the system and controls, contact your installer as soon as possible. © Baxi Heating UK Ltd 2013...
  • Page 6: Repressurising System

    Repressurising turn both taps off. 8. Disconnect the copper pipe from the taps (a small amount of water may be present) and remove it. Keep the pipe in a safe place for future use. © Baxi Heating UK Ltd 2013...
  • Page 7: Clearances

    450mm Min would affect the operation of your boiler. Your installer should have insulated any exposed pipework. For Servicing Purposes 5mm Min Fig. 4 In Operation © Baxi Heating UK Ltd 2013...
  • Page 8: Care Of The Boiler

    5 E160 Fan or Fan Wiring Fault seconds. If the boiler does not relight, or the code is displayed regularly contact your installer or service engineer. © Baxi Heating UK Ltd 2013...
  • Page 9: Legislation

    The service engineer should complete the relevant Service Record on the Benchmark Checklist after each service. 4. The Benchmark Checklist may be required in the event of any warranty work. © Baxi Heating UK Ltd 2013...
  • Page 10: Notes

    7.0 Notes © Baxi Heating UK Ltd 2013...
  • Page 11: Emergency

    Gas Tap towards the wall (Fig. 6). 3. Call your Installer or Service Engineer as soon as possible. Fig. 6 Heating Flow and Return Isolating Valves © Baxi Heating UK Ltd 2013...
  • Page 12: Warranty & Service

    2 Years Free Warranty - register today To receive your 2 years free warranty please complete the form supplied with the boiler or simply call heateam, the service of Baxi Heating UK Ltd on 0800 731 1644. Our promise to you...

This manual is also suitable for:

Main system 24 eco eliteMain system 28 eco elite

Table of Contents