Configuration Commands - TANDBERG N3 User Manual

TANDBERG Gatekeeper User Manual

Configuration commands

xConfiguration Gatekeeper AlternateGK
[1..5]: <IPAddr>
xConfiguration Gatekeeper
AutoDiscovery: <On/Off>
xConfiguration Gatekeeper
CallsToUnknownIPAddresses:
<Off/Direct/Indirect>
xConfiguration Gatekeeper
CallTimeToLive: <60..65534>
xConfiguration Gatekeeper DNSResolution
Mode: <On/Off>
xConfiguration Gatekeeper Downspeed
PerCall Mode: <On/Off>
xConfiguration Gatekeeper Downspeed
Total Mode: <On/Off>
xConfiguration Gatekeeper
ForwardLocationRequests: <On/Off>
xConfiguration Gatekeeper LocalDomain
DomainName
xConfiguration Gatekeeper LocalPrefix:
<prefix>
xConfiguration Gatekeeper Policy Mode:
<On/Off>
xConfiguration Gatekeeper Registration
AllowList [1..1000] Pattern: <pattern>
xConfiguration Gatekeeper Registration
DenyList [1..1000] Pattern: <pattern>
xConfiguration Gatekeeper Registration
RestrictionPolicy:
<None/AllowList/DenyList>
xConfiguration Gatekeeper TimeToLive:
<60..65534>
xConfiguration HTTP Mode: <On/Off>
36
Description
List of Alternate Gatekeepers' IP addresses.
Specifies if the Gatekeeper supports automatic registration of
endpoints.
The default is On.
Specifies whether or not the Gatekeeper will attempt to call
systems which are not registered with any Gatekeeper. See
Calling for further detail.
The default is Indirect.
Interval in seconds at which endpoints are polled to verify that
they are still in a call.
The default is 120 seconds.
Determines whether or not DNS lookup of H.323 URI's is
enabled on this system.
Determines whether or not the system will attempt to down-
speed a call if there is insufficient per-call bandwidth configured
to fulfill the request.
The default is On.
Determines whether or not the system will attempt to down-
speed a call if there is insufficient total bandwidth available to
fulfill the request.
The default is On.
Determines behavior on receipt of a location request from
another Gatekeeper. If set to "On", if a location request cannot
be resolved locally, it will be forwarded to neighbor
Gatekeepers.
The default is On.
Domain that the Gatekeeper is responsible for. Used when
searching for matching endpoint registrations.
Set the local zone prefix of the system.
Determines whether or not the CPL policy engine is active.
The default is On.
Specifies a pattern in the registration allowed list
Specifies a pattern in the registration denied list
Policy in use to determine who may register with the system.
The default is None.
The interval at which the system polls the endpoint to make
sure it is still functioning. Specified in seconds.
The default is 1800 seconds.
Enables/disables HTTP support.
You must restart the system for changes to take effect.