TANDBERG N3 User Manual page 44

TANDBERG Gatekeeper User Manual
Configuration commands
xConfiguration Pipes Pipe [1..100]
Bandwidth Total Limit: <1..100000000>
xConfiguration Pipes Pipe [1..100]
Bandwidth Total Mode:
<None/Limited/Unlimited>
xConfiguration Pipes Pipe [1..100]
Bandwidth PerCall Limit: <1..100000000>
xConfiguration Pipes Pipe [1..100]
Bandwidth PerCall Mode:
<None/Limited/Unlimited>
xConfiguration Pipes Pipe [1..100]
Name: <pipename>
xConfiguration SNMP CommunityName:
<name>
xConfiguration SNMP Mode: <On/Off>
xConfiguration SNMP SystemContact:
<name>
xConfiguration SNMP SystemLocation:
<name>
xConfiguration SSH Mode: <On/Off>
xConfiguration SubZones DefaultSubZone
Bandwidth PerCall Limit: <1..100000000>
xConfiguration SubZones DefaultSubZone
Bandwidth PerCall Mode:
<None/Limited/Unlimited>
xConfiguration SubZones DefaultSubZone
Bandwidth Total Limit: <1..100000000>
xConfiguration SubZones DefaultSubZone
Bandwidth Total Mode:
<None/Limited/Unlimited>
xConfiguration SubZones
TraversalSubZone Bandwidth PerCall
Limit: <1..100000000>
xConfiguration SubZones
TraversalSubZone Bandwidth PerCall
Mode: <None/Limited/Unlimited>
xConfiguration SubZones
TraversalSubZone Bandwidth Total Limit:
<1..100000000>
38
Description
Bandwidth associated with a pipe, keyed by index.
Whether or not a given pipe is enforcing total bandwidth
restrictions. None corresponds to no bandwidth available.
Per call bandwidth of a pipe.
Whether or not a given pipe is enforcing per-call bandwidth
restrictions. None corresponds to no bandwidth available.
Name for a pipe.
SNMP Community names are used to authenticate SNMP
requests. SNMP requests must have this `password' in order to
receive a response from the SNMP agent in the Gatekeeper.
You must restart the system for changes to take effect.
Turn on/off SNMP support.
You must restart the system for changes to take effect.
Used to identify the system contact via SNMP tools such as
TANDBERG Management Suite or HPOpenView.
You must restart the system for changes to take effect.
Used to identify the system location via SNMP tools such as
TANDBERG Management Suite or HPOpenView.
You must restart the system for changes to take effect.
Enables/disables SSH and SCP support.
You must restart the system for changes to take effect.
Per call bandwidth of the default subzone.
Whether or not the default subzone is enforcing total bandwidth
restrictions. None corresponds to no bandwidth available.
Total bandwidth available on the default subzone.
Whether or not the default subzone is enforcing per-call
bandwidth restrictions. None corresponds to no bandwidth
available.
Per-call bandwidth available on the traversal subzone.
Whether or not the traversal subzone is enforcing per-call
bandwidth restrictions. None corresponds to no bandwidth
available.
Total bandwidth available on the traversal subzone.