Monitor Configuration - TANDBERG 1500 MXP User Manual

TANDBERG 1500 MXP

2.3 Monitor Configuration

Note that all necessary default monitor settings are done prior to shipping the product and the
following steps concerning monitor adjustments are not required if these settings have not
been altered.
Turn on the TANDBERG 1500 MXP
Turn on the TANDBERG 1500 MXP by pressing the power button at the rear of the codec.
Turn on the monitor
Turn on the monitor by pressing the power button on the screen (7).
Select DVI input
Press the input select button on the screen (1) and use the channel buttons (2 and 3) to select
DVI. Confirm the selection with the menu button (6). Now, you should see a video image on the
screen with a welcome menu.
Adjust the monitor settings
Press the menu button (6) to see the monitor menu. Use the Volume + and - (4 and 5) to navigate
left and right. Use the channel buttons (2 and 3) to navigate up and down. Press the menu button
(6) to confirm. Make necessary adjustments.
12