Securing With Tls; Openldap; Prerequisites; Installing The H.350 Schemas - TANDBERG N3 User Manual

TANDBERG Gatekeeper User Manual
commUniqueId: comm1
h323Identityh323-ID: MeetingRoom1
h323IdentitydialedDigits: 626262
h235IdentityEndpointID: meetingroom1
h235IdentityPassword: mypassword
Add the ldif file to the server using the command:
ldifde -i -c DC=X <ldap_base> -f filename.ldf
This will add a single H.323 endpoint with an H.323 Id alias of "MeetingRoom1" and an E.164
alias of "626262". The entry also has H.235 credentials of id "meetingroom1" and password
"mypassword" which are used during authentication.

7.1.3 Securing with TLS

To enable Active Directory to use TLS, you must request and install a certificate on the Active
Directory server. The certificate must meet the following requirements:

Be located in the Local Computer's Personal certificate store. This can be seen using the
Certificates MMC snap in.

Have the private details on how to obtain a key associated for use with it stored locally.
When viewing the certificate you should see a message saying "You have a private key
that corresponds to this certificate".

Have a private key that does not have strong private key protection enabled. This is an
attribute that can be added to a key request.

The Enhanced Key Usage extension includes the Server Authentication object identifier,
again this forms part of the key request.

Issued by a CA that both the domain controller and the client trust.

Include the Active Directory fully qualified domain name of the domain controller in the
common name in the subject field and/or the DNS entry in the subject alternative name
extension.

7.2 OpenLDAP

7.2.1 Prerequisites

These instructions assume that an OpenLDAP server has already been installed. For details
on installing OpenLDAP see the documentation at http://www.openldap.org.
The following examples use a standard OpenLDAP installation on the Linux platform. For
installations on other platforms the location of the OpenLDAP configuration files may be
different. See the OpenLDAP installation documentation for details.

7.2.2 Installing the H.350 schemas

The following ITU specification describes the schemas which are required to be installed on
the LDAP server:
H.350 – Directory services architecture for multimedia conferencing - An LDAP

schema to represent endpoints on the network.
H.350.1 – Directory services architecture for H.323 – An LDAP schema to represent

H.323 endpoints.
48