Table of Contents
Advertisement
System configuration
• Switch the system on by activating the power switch on the system.
• After the system has performed a self-test routine, product logo and a 'Welcome' menu will be displayed on the
monitor.
• Enabled but unused ISDN lines (lines not active) should be disabled. Select the Quick Key 'System Info' (on
the remote control) to view line status.
menu
P
M
RESS
ENU ON THE REMOTE CONTROL
'E
MENU AND SET
NABLED
• Enter System Name to identify the system during an MCU conference. Select 'Utilities', 'System Name' and
enter the name using the number keys (as on a mobile phone).
• Select the language you want to use in 'Terminal Settings', 'Language'.
• To activate a software option, enter an option key (see paperwork accompanying your system), see
'Terminal Settings', 'Software Options'.
• Press C
on the remote control. A dial tone should be heard if the network is active.
ONNECT
connect
• Using the monitor remote control, adjust the volume on the monitor to a level of your choice. This
volume will be the default volume for all calls.
TANDBERG Videoconferencing System
. S
ELECT THE MENU
: O
'.
FF
'T
S
', 'ISDN
ERMINAL
ETTINGS
SETTINGS
15
Installation
T
NOTE
HESE SETTINGS ARE ESSENTIAL
FOR OPTIMAL SYSTEM SET
'. S
'L
S
ELECT THE RELEVANT
INE
-
.
UP
'
ETUP
Advertisement
Table of Contents
