System Configuration - TANDBERG 1000 MXP User Manual

2.4 System Configuration

The system must be configured for each installation. Configuration settings can be made via the
system menu.
Navigate through the menu system using the arrow keys and OK. Remember to press the Save
button on the bottom of each menu to save your changes. Press Cancel (x) to return to the
previous Menu. See next section for more information about how to use the menus and the
remote control.
General configuration:
1. Open the General Settings menu
Press OK to open the Main Menu (if it is not already open).
Select Control Panel and then select Administrator Settings. Select General to open
the General Settings menu.
2. Language
Press OK in the Language field and select the language you want to use from the list.
3. System Name
Enter a name in the System Name field using the number keys on the remote control,
as you would do with a mobile or cellular phone.
4. Auto Answer, Max Call Length, Global Phone Book Settings and Permissions
Leave Auto Answer, Max Call Length, Access code and Permissions unchanged if no
special needs are required. See chapter 4.1
5. Software Options
To activate all options for the system, you must enter a new option key in the
Software Options menu (see paperwork accompanying your system). The Presenter
General Settings for more information.
Installation
11