Table of Contents
Advertisement
When Sleep Mode is selected, the following quick-keys are displayed:
Pressing 'Sleep Now' puts the monitors in sleep mode. The system will still accept incoming calls.
Pressing '60 Minutes' or '3 Hours' will delay entering sleep mode accordingly.
Pressing any key or picking up the remote control will deactivate Do Not Disturb/Sleep Mode.
To see numbers, line status etc., select 'System Info'. For further information see 'Diagnostics' in 'Advanced
use'.
On Screen Symbols
The system have a number of symbols signalling different settings.
This symbol will be shown when the volume is turned off on the system.
This symbol will be shown when the microphone is muted/turned off. It will also start to flash if audio is
detected in the room during a call.
This double padlock symbol will be shown when AES* encryption (Secure Conference) is active.
This padlock symbol will be shown when DES encryption (Secure Conference) is active.
This open padlock symbol is shown during the initialization phase for encryption. During this period the
call is not secure.
When the system is On Air in a Multisite conference, this symbol will be shown.
* Optional feature
TANDBERG Videoconferencing System
27
General use
Advertisement
Table of Contents
