Chapter 1 Introduction - NETGEAR GS418TPP Hardware Installation Manual

Easy-mount 16-port gigabit high power poe+ smart managed pro switch with 2 sfp ports 240w

Hide thumbs Also See for GS418TPP:

Table of Contents

Introduction

This hardware installation guide complements the installation guide that came with your

switch and applies to the NETGEAR GS418TPP ProSAFE

16-Port Gigabit Smart Managed

Switch with PoE+ and 2 SFP Ports. The switch is specifically designed to "put your ports

where you want them" to power your IP security cameras, WiFi access points, or VoIP

phones with PoE+ (802.3at) up to 30W per port. The switch can provide a total power

budget of 240W across all active PoE+ ports.

The GS418TPP provides sixteen 1-Gigabit RJ-45 copper PoE+ ports with 2 dedicated

SFP fiber ports in a unique form factor that can be mounted on a wall, a rectangular

pole, or desktop.

This chapter serves as an introduction to the switch and includes the following sections:

• Overview

• Features

• Safety instructions and warnings

Note: For more information about the topics that are covered in this manual, visit the

support website at support.netgear.com.

Note: For technical specifications, see the data sheet at

netgear.com/business/products/switches/managed. For switch documentation, visit

downloadcenter.netgear.com.

Table of Contents

Troubleshooting