NETGEAR GS418TPP Hardware Installation Manual page 27

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)
Model GS418TPP
improves the efficiency of the switch, which results in the improvement of its overall
performance as well as the performance of the network.
After you power on the switch for the first time, you can configure the switch using the
Smart Control Center program for very basic setup. To download the Smart Control
Center Utility, you can visit netgear.com/support, enter Smart Control Center in the
search box, and click the Downloads button. For more information, see the user manual,
which you can download from the same link.
Note: By default, the DHCP client of the switch is enabled. If the switch cannot get an
IP address from a DHCP server, the switch's default IP address is 192.168.0.239 and the
default subnet mask is 255.255.255.0.
Installation 27 Hardware Installation Guide