Leds - NETGEAR GS418TPP Hardware Installation Manual

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)
Figure 2. Back panel

LEDs

This section describes the LED designations of the switch.
Table 1. LEDs on switch
LED
Power LED
Fan LED
RJ-45 SPD Mode LED
(Link, Speed, Activity)
for copper ports 1 to 16
Hardware Overview
Model GS418TPP
Description
• Solid green . The device is powered on.
• Solid amber. The device is booting.
• Off. Power is not supplied to the device.
• Solid amber. The fans has failed.
• Off. The fan is operating normally.
Left LEDs.
• Off: No link is established.
• Solid green: A valid 1000 Mbps link is established.
• Blinking green. The port is transmitting or receiving packets at 1000 Mbps.
• Solid amber. A valid 10/100 Mbps link is established.
• Blinking amber. The port is transmitting or receiving packets at 10/100 Mbps.
Right LED
• Off: PoE mode is off.
• Solid green: PoE mode is on.
• Solid amber: A PoE fault occurred.
13 Hardware Installation Guide