Hardware Description; Front Panel; Back Panel - NETGEAR GS418TPP Hardware Installation Manual

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)

Hardware description

The following sections describe the switch hardware features.

Front Panel

The switch provides sixteen 10/100/1000M BASE-T RJ-45 PoE ports. The following
figure shows the front panel.
Figure 1. Front panel
Number
1
2
3
4
5
6

Back Panel

The switch integrates a fixed, internal power supply unit (PSU).
The back panel does not contain any components other than two mounting holes that
allow you to mount the switch horizontally or vertically and a serial console port for
debugging. The bottom panel also contains mounting holes. For more information, see
Step 4: Install the Switch on page 20.
The following figure illustrates the back panel with the mounting holes.
Hardware Overview
Model GS418TPP
Description
Power, Fan, and PoE LEDs (see LEDs on page 13).
Reset and Factory Defaults buttons
USB port
Sixteen independent 10/100/1000M BASE-T RJ-45 PoE ports, each with
a right LED that indicates the PoE status and a left LED that functions as
the combined speed and activity LED (see LEDs on page 13).
Two SFP ports
One AC power receptacle
12 Hardware Installation Guide