NETGEAR GS418TPP Hardware Installation Manual page 22

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)
To install the switch to a rectangular pole or table leg:
1. Attach the supplied rubber belts to the supplied mount by pulling the belts through
the openings in the mount.
2. Strap the belts with the attached mount to the rectangular pole or table leg.
3. Click-attach the switch to the mount by doing the following:
a. Line up the back or bottom of the switch with the mount.
b. Insert the mount's locking tab and hook into the notches on the back or bottom
of the switch.
Installation
Model GS418TPP
22 Hardware Installation Guide