Chapter 3 Installation - NETGEAR GS418TPP Hardware Installation Manual

Easy-mount 16-port gigabit high power poe+ smart managed pro switch with 2 sfp ports 240w

Hide thumbs Also See for GS418TPP:

Table of Contents

Installation

This chapter describes the installation procedures for the switch. Switch installation

involves the steps described in the following sections:

• Step 1: Prepare the Site

• Step 2: Protect Against Electrostatic Discharge

• Step 3: Unpack the Switch

• Step 4: Install the Switch

• Optional Step 5: Install SFP Transceiver Modules

• Step 6: Connect Devices to the Switch

• Step 7: Check the installation

• Step 8: Apply AC Power and Check the LEDs

• Step 9: Manage the switch

Table of Contents

Troubleshooting