Optional Step 5: Install Sfp Transceiver Modules; Step 6: Connect Devices To The Switch - NETGEAR GS418TPP Hardware Installation Manual

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)
Model GS418TPP
Optional Step 5: Install SFP Transceiver
Modules
The following optional procedure describes how to install an optional SFP transceiver
module into one of the SFP ports of the switch.
Note: Contact your NETGEAR sales office to purchase these modules. If you do not
want to install an SFP module, skip this procedure.
To install an SFP transceiver module:
1. Insert the transceiver into the SFP port.
2. Press firmly on the flange of the module to seat it securely into the connector.

Step 6: Connect Devices to the Switch

The following procedure describes how to connect computers to the switch's RJ-45
ports. The switch supports Auto Uplink technology, which allows you to attach devices
using either straight-through or crossover cables.
Note: Ethernet specifications limit the cable length between the switch and the attached
device to 328 feet (100 meters).
Installation 25 Hardware Installation Guide