Step 2: Protect Against Electrostatic Discharge - NETGEAR GS418TPP Hardware Installation Manual

Easy-Mount 16-Port Gigabit High Power PoE+ Smart Managed Pro Switch with 2 SFP Ports (240W)
Table 2. Site Requirements (Continued)
Characteristics Requirements
Cabling Route cables to avoid sources of electrical noise such as radio transmitters, broadcast
amplifiers, power lines, and fluorescent lighting fixtures.
Environmental • Temperature. Install the switch in a dry area with an ambient temperature between
• Operating humidity. The maximum relative humidity of the installation location must
• Ventilation. Do not restrict airflow by covering or obstructing air inlets on the sides of
• Operating conditions. Keep the switch at least 6 feet (1.83 meters) away from the
Step 2: Protect Against Electrostatic
Discharge
WARNING:
Static electricity can harm delicate components inside your system. To prevent
static damage, discharge static electricity from your body before you touch any
of the electronic components, such as the microprocessor. You can do so by
periodically touching an unpainted metal surface on the switch.
You can also take the following steps to prevent damage from electrostatic discharge
(ESD):
• When unpacking a static-sensitive component from its shipping carton, leave it in
the antistatic package until you are ready to install it. Just before unwrapping the
antistatic package, discharge static electricity from your body.
• Before moving a sensitive component, place it in an antistatic container or package.
• Handle all sensitive components in a static-safe area. If possible, use antistatic floor
pads, workbench pads, and an antistatic grounding strap.
Installation
Model GS418TPP
0ºC and 50ºC (32ºF and 122ºF). Keep the switch away from heat sources such as direct
sunlight, warm-air exhausts, hot-air vents, and heaters.
not exceed 90%, noncondensing.
the switch. Keep at least 2 inches (5.08 centimeters) free on all sides for cooling. The
room or wiring closet in which you install the switch must provide adequate airflow.
nearest source of electromagnetic noise, such as a photocopy machine.
18 Hardware Installation Guide