Leds Of The 8-Port Poe+ And Poe++ Models - NETGEAR GSM4248PX Hardware Installation Manual

The type of fiber ports depends on the model:
- Model M4250-10G2F-PoE+: Two 1GBASE-X SFP ports.
- Model M4250-10G2XF-PoE+: Two 10GBASE-X SFP+ ports.
- Model M4250-10G2XF-PoE++: Two 10GBASE-X SFP+ ports.
• AC power receptacle and On/Off power switch: The AC receptacle accepts input
power of 100–240V ~ 50–60 Hz. The amperage depends on the model:
- Model M4250-10G2F-PoE+: 3.5–2.25A.
- Model M4250-10G2XF-PoE+: 5A.
- Model M4250-10G2XF-PoE++: 10A.

LEDs of the 8-port PoE+ and PoE++ models

This section describes the LED designations of the 8-port PoE+ and PoE++ models.
The system LEDs and ports LEDs on the back panel are replicated on the front panel.
(The exception are the port LEDs for the OOB port, which are not replicated on the front
panel.)
The LEDs are clearly named or numbered on the front panel and the back panel.
Table 1. LEDs of the 8-port PoE+ and PoE++ models
LED
System LEDs
Power LED
Fan LED
POE LED
Hardware Overview
AV Line of Fully Managed Switches M4250 Series
Description
Solid green: The switch is powered on and operating normally.
Solid yellow: The switch is starting.
Off: Power is not supplied to the switch.
Solid green: The fans are functioning normally.
Solid yellow: One or more fans are malfunctioning.
Off: Sufficient (more than 7W of) PoE power is available.
Solid yellow: Less than 7W of PoE power is available.
Blinking yellow: At least once during the previous two minutes, less than 7W
of PoE power was available.
16 Hardware Installation Guide