Hardware Description; Front Panel; Back Panel And Bottom Panel - NETGEAR GS408EPP Hardware Installation Manual

ProSAFE 8-Port Gigabit Ethernet Easy-Mount Switch GS408EPP

Hardware Description

This section describes the switch hardware features.

Front Panel

The switch provides eight 10/100/1000BASE-T RJ-45 PoE ports. The following figure shows
the front panel.
Power and PoE LEDs
Factory Defaults button
Figure 1. Front panel
From left to right, the front panel provides the following components:
• Power and PoE LEDs (see
• Recessed Factory Defaults button
• Eight independent 10/100/1000BASE-T RJ-45 PoE ports, each with a right LED that
indicates the PoE status and a left LED that functions as the combined speed and activity
LED (see LEDs
• One AC power receptacle

Back Panel and Bottom Panel

The switch integrates a fixed, internal power supply unit (PSU).
The back panel does not contain any components other than two mounting holes that allow
you to mount the switch horizontally or vertically. The bottom panel also contains mounting
holes. For more information, see
The following figure illustrates the back panel with the mounting holes.
Figure 2. Back panel
10/100/1000BASE-T PoE+ ports
LEDs on page 10)
on page 10)
Step 4: Install the Switch
Hardware Overview
on page 15.
9
AC power receptacle