Updating The E³ Experience; Applying An E³ Experience System Software Update; Updating E³ Experience System Software Manually - Smart Technologies SMART Board MX100 Series Installation And Maintenance Manual

Hide thumbs Also See for SMART Board MX100 Series:
Table of Contents

Advertisement

CHAPTER 7
MAINTAINING THE DISPLAY
Updating the e³ experience
The display checks for e³ experience system software updates automatically, provided the
display's date and time are set correctly (see Date and time on page 63) and the display is
connected to the internet. The display notifies you when an e³ experience system software update
is available.
Tap Update to update the e³ experience system software.
l
Tap Ignore to skip that specific e³ experience system software. The display won't apply that
l
update ever if you check for updates manually.
Tap Cancel to update the e³ experience system software at a later time.
l
The display applies the e³ experience system software update automatically if no options are
selected after a short time
When the update is installing, touch, the front control panel and remote control will not respond.
To make sure the network is configured properly for firmware updates, see configuring-a-
network.htm.
Applying an e³ experience system software update
To apply a system software update
1. A dialog box appears on the screen asking if you want to update the e³ experience system
software.
2. Tap Update to update the e³ experience system software.
OR
Tap Cancel to update the e³ experience system software later.
To apply a system software update from Settings
1. On the display, tap the Home button
2. Tap Settings.
3. Tap Update.
4. Under Update, tap Update.
Updating e³ experience system software manually
You can download system software updates at
42
smarttech.com/kb/171288
on the screen to open the launcher.
smarttech.com/downloads
and update your display

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbid-mx165Sbid-mx175Sbid-mx186

Table of Contents