More Information; Usb Extenders - Smart Technologies SMART Board MX100 Series Installation And Maintenance Manual

CHAPTER 1
WELCOME

USB extenders

As noted in Connecting cables for room computers, guest laptops and other input sources on
page 21, the USB connection between the display and computer should be no longer than 16'
(5 m). If you need to connect a computer that is more than 16' (5 m) from the display, use one of the
following USB extenders:
Extender
USB-XT
CAT5-XT-1100
SMART recommends only using USB extenders with the USB connectors on the side and bottom
connector panels on the display.
For more information, see:
Troubleshooting and extending the USB 2.0 and USB 3.0 connection to your SMART
l
interactive display
USB cables and connectors
l

More information

In addition to this guide, SMART provides the following documents for the display:
Document
User's guide
SBID-MX165, MX175, MX186, MX265, MX275, MX286, MX365,
MX375, and MX386 installation instructions
SBID-MX165 specifications
SBID-MX175 specifications
SBID-MX186 specifications
Comparison
These documents are available in the Support section of the SMART website
(smarttech.com/support). Scan the QR code on the cover of this guide to view the SMART Board
MX100 series interactive displays pages in the Support section.
7 smarttech.com/kb/171288
Specifications
smarttech.com/kb/119318
smarttech.com/kb/170202
Link
smarttech.com/kb/171289
smarttech.com/kb/171274
smarttech.com/kb/171265
smarttech.com/kb/171266
smarttech.com/kb/171267
smarttech.com/kb/171161