Front Connector Panel; Front Control Panel; Remote Control; Status Light - Smart Technologies SMART Board MX100 Series Installation And Maintenance Manual

CHAPTER 1
WELCOME
CAUTION
When you return a pen to the magnetic holder, make sure it's centered in its holder to keep it
from falling and being damaged.

Front connector panel

The front connector panel includes connectors for USB
peripherals and a computer or other input source.
No. Name
1 USB 2.0 Type-A connector
2 USB 2.0 Type-A connector
3 USB 2.0 Type-B connector
4 HDMI 3 input connector

Front control panel

The front control panel contains the Power, Input Select, Menu, Freeze, Mute and volume control
buttons.

Remote control

The remote control is an alternative to the front control panel for controlling the display.

Status light

The status light blinks green and red when it registers a button being pressed on the remote
control.
When the status light is red, the display is in a low power state. To wake the display, press the
Power button on the front control panel or POWER on the remote control.
5 smarttech.com/kb/171288
Procedure
Connect USB drives and other devices that
you want to use with the currently selected
input source.
Connect USB drives and other devices that
you want to use with the e³ experience.
Connect a USB cable to the display and
computer to provide touch control of the
computer connected to HDMI 3.
Connect a computer or other input source to
the display (see page 21).