Table of Contents
Advertisement
Chapter 1
Welcome
Room computers and guest laptops
You can connect room computers and guest laptops to the display and view and interact with their inputs.
The display comes with SMART software that you can install on connected computers to take full advantage
of the display's features while using the connected computers.
For more information, see Connecting room computers and guest laptops on page 48.
Accessory slot
You can install an OPS-compatible device, such as a SMART OPS PC module, in the accessory slot.
SMART OPS PC modules provide a complete Windows® 10 Pro installation.
For more information on SMART OPS PC modules, see SMART OPS PC module on page 19.
NOTE
Unlike previous SMART Board interactive displays, the SMART Board 6000S and 6000S Pro series
interactive displays don't require an iQ appliance in the accessory slot. The iQ experience is built into
these interactive displays (see iQ experience on page 11). For this reason, SMART doesn't support
installing iQ appliances in these displays' accessory slots. However, the AM50 appliance allows the use of
an Intel Compute Card on the 6000S and SMART Board 6000S (C) models.
Convenience panel
Proximity sensor
smarttech.com/kb/171415
The convenience panel provides buttons for turning the display on and off,
controlling the volume, freezing and unfreezing the screen, and showing
and hiding a screen shade. It also includes connectors for
and a computer or other input source (available connectors vary by model,
see Connecting room computers and guest laptops on page 48).
For more information about the convenience panel, see Using the
convenience panel on page 23.
On SMART Board 6000S (V3) models, the proximity sensor is located in
the top-right corner of the display's frame. On the 6000S and 6000S (C)
models, the sensor is in the top-left corner.
The proximity sensor can detect people up to approximately 16' (5 m)
away when the display is in an energy saving mode mode.
USB peripherals
13
Advertisement
Table of Contents
