Opening Or Closing Access Doors; Figure 3-6 Ac Interface Access Door; Figure 3-7 Dc Interface Access Door - Xantrex GT100 Series Planning And Installation Manual

Installation

Opening or Closing Access Doors

AC
Disconnect
handle

Figure 3-6 AC Interface Access Door

Figure 3-7 DC Interface Access Door

3–8
DC
Disconnect
Switch
handle
This manual for use by qualified installers only
To Open Access Door:
1. Confirm that the AC Disconnect handle
is placed in the OFF (Open) position
prior to opening the door.
2. Using the key supplied with the unit,
turn counterclockwise to unlock.
3. Pull open from right side.
To Close Access Door:
1. Confirm that the AC Disconnect handle
is placed in the OFF (Open) position
prior to closing the door.
2. Close the door.
3. Using the key supplied with the unit,
turn clockwise to lock.
To Open Access Door:
1. Confirm that the DC Disconnect Switch
handle is placed in the OFF (Open)
position prior to opening the door.
2. Using the key supplied with the unit,
turn counterclockwise to unlock.
3. Pull open from the left side.
To Close Access Door:
1. Confirm that the DC Disconnect Switch
handle is placed in the OFF (Open)
position prior to closing the door.
2. Close the door.
3. Using the key supplied with the unit,
turn clockwise to lock.
153379