Physical Characteristics; Figure 1-1 Main Inverter (Open Enclosure View) - Xantrex GT100 Series Planning And Installation Manual

Local Display and
Remote Graphic
User Interface

Physical Characteristics

153379
The GT100 includes a local user interface comprised of an O
keypad, and 4-line, 80 character VFD display.
A user-friendly, Xantrex GT View Graphic User Interface (GUI) provides a
remote interface for operator interrogation of GT100 system status, control,
metering/data logging and protective functions within the GT100. The status,
control, and logging features are supported by an optional modem via an RS232
connection for remote monitoring. Alternatively, a user selectable RS485/Modbus
connection is also available for remote plant monitoring.
The GT100 is assembled in a single NEMA-3R, corrosive resistant, powder-
coated enclosure that includes two access doors to house the electronics described
above. Internally, the GT100 is compartmentalized to include sections for the AC
Interface (left side), the Power Electronics (upper middle), the Isolation
Transformer (lower middle), and the DC Interface (right side). The single
enclosure is constructed and delivered as one complete assembly.
These sections are identified in Figure 1-2.

Figure 1-1 Main Inverter (Open Enclosure View)

This manual for use by qualified installers only
Physical Characteristics
/O switch,
N FF
1–3