Chapter 7 - Resetting And Factory Settings; General System Reset; To Reset Factory Settings; Software Version - Pentair Pool Products Nocchi R4TE Use And Maintenance Manual

CHAPTER 7 - RESETTING AND FACTORY SETTINGS

7.1 GENERAL SYSTEM RESET

Triggers a general module reset and reloads set values saved in eeprom. Press as a last resort only in order
to restart the module. If, for whatever reason, the module becomes blocked, wait approximately 10 seconds
for the module itself to automatically launch a general reset. If this does not reset the system, use this key
and contact an assistance centre.
Reset key sequence

7.2 TO RESET FACTORY SETTINGS

The factory parameters can be loaded by pressing a sequence of keys.
Key sequence
To reset settings
7.3

SOFTWARE VERSION

Key sequence to see
the software version
58
x Press only as a last resort to restart the system
x Loads all default values and deletes all previous values entered.
DOWN", "ESC", "ARROW DOWN", "ESC", "ARROW DOWN", "ESC", press for
"
Page 28 of 29
28 - GB -
Press SET button for 20"
10 seconds
Press SET to confirm reset
"ARROW UP" for 5 seconds
28