Programming Menu - Pentair Pool Products Nocchi R4TE Use And Maintenance Manual

- Day of the week.
3. A Æ Absorbed current
- Current absorbed by the pump in Ampere.
- Frequency graph indicator
- Day of the week
Æ Time
4. hh:mm
- Time.
- Day of the week.
- Frequency graph indicator
5. Complementary pump status (unit only)
- "STB" the complementary pump is on standby
- "ON "the complementary pump is on and regulating
- "TOP" the complementary pump is on and is at the maximum possible frequency.
- < Alarm Code > the complementary pump is in alarm (for a description of alarm codes, please
see Chpt. 6.0).
The parameter displayed by default is head (m or PSI); after 10 minutes of displaying one of the other
parameters the system automatically returns to displaying pressure.
5.3

PROGRAMMING MENU

Functioning of the module is programmable using a series of parameters grouped into 4 sub-menus:
x The CPS module indicates with the symbol
parameter.
x Press the SET button to save the parameters which have been set and exit the
programming mode.
x Press ESC to exit the programming mode without saving any of the parameters
which have been changed.
Menu
Time/day
SET-POINT
Advanced parameters (Lev.1)
Installation parameters (Lev.2)
x For a correct configuration, we recommend using the "installation" and
"advanced" parameters with the machine on STOP and connected to the power
supply.
Description
To enter the time and day of the week.
To change the system pressure SET-POINT.
To change setting parameters.
To change system setting parameters.
Page 13 of 14
13
13 - GB -
the modification status of the
43