Programming Clock/Day; Set Point - Pentair Pool Products Nocchi R4TE Use And Maintenance Manual

5.3.1 PROGRAMMING CLOCK/DAY

x
x
DESCR
MENU
DISPLAY
ORA Time
GIO Day of week
To modify the time, repeatedly press the "MODE" button until you arrive to the time parameter.
- Press the "SET" button to enter the menu to change the date and hour
- During the modification of the parameters, the symbol
- With the buttons
- Press "MODE" to move onto changing the day
- With the buttons
- To save the values press "SET". The symbol
on the screen for a few seconds to show that the data has been saved.
- Press "MODE" to go back to the head screen.

5.3.2 SET POINT

DESCR
MENU
DISPLAY
dPc 1
dPv 1 Set Point 1
Frq 1
dPc 2
dPv 2 Set Point 2
Frq 2
tEP Temperature
function
Aut AUTO learning
function
In A External
analogue setting
To access this menu press and release the SET button (see fig.2):
- During the modification of the set point parameters, the symbol
- With the buttons
44
During the first installation phase, the module display flashes to indicate the internal
clock needs updating.
The clock is equipped with a battery to maintain the time and date for 24 hours if
there is no power.
PARAMETER
NAME
Time on system
Day of week
it is possible to modify the time.
it is possible to modify the day.
PARAMETER
NAME
Main pressure value
Secondary pressure value (can be set only if the
parameter SET n = 2)
Value identifying the way in which the set point will
vary based on temperature
Activate or deactivate function
Value identifying the way in which the set point will
vary based on an external analogue signal
it is possible to modify the head or frequency pressure values;
Page 14 of 15
DESCRIPTION
on the display lights up.
.
will disappear and the words "REC" will appear
DESCRIPTION
lights up on the display;
14
14 - GB -
DEF MIN MAX
00:00 00:00 23:59
MO MO SU
.
DEFAULT MIN MAX
(m) (m) (m)
n n n
n n n
5 1 9
OFF OFF ON
5 1 9